Protect Wicker Patio Table – It is traditional to use wicker patio table. However, if a wicker patio table is exposed to the weather, the cage fade, wipe out, become moldy or otherwise break down. You should clean the table as soon as you notice any problems. If the table is painted, you can repaint wicker and seal it so it looks like new. These types of prevention can add years to the life of the table.
Instructions for protect wicker patio table, Wear rubber gloves and eye protection. Mix a bucket of warm water with 1/2 cup of bleach. Scrub the wicker table with a stiff brush and bleach water. Allow the bleach to sit on the willow on the table has a lot of mildew stains. Turn the table upside down and scrub the bottom too. Rinse the entire table after 10 minutes. If there is still mold, apply more water to bleach stains bleach and let sit for another 10 minutes. Rinse and let the table dry for 24 hours.
12 Photos Gallery of: Protect Wicker Patio Table
Next steps for protect wicker patio table, Sand any glossy painted areas in the table easy if you want to paint the table. This enables the new paint to stick rattan. Place plastic wrap over the wicker table in a place that has a moderate temperature, not in direct sunlight. Choose a spray paint for wood surfaces in the color you want. Spray paint the wicker with long, even strokes. Keep spray equidistant from interlaced to create a uniform coat. Thin coats are better than thick coats. Spray the top and bottom of the table. Let each coat dry for at least 30 minutes. Spray as many coats as necessary to achieve the look you want. Matt paint creates a more natural finish, while the glossy color looks shinier and more painted. Spray a no yellowing clear coat finish over all surfaces of the table to further protect the table from the elements.